Pheek’s Guide To Making Dub Techno

/in , /by

I think making Dub Techno is one of the most requested blog posts I have been asked to do, and for years, I resisted it. I think there was some sort of shyness and perhaps, a lack of technical vocabulary on where to begin when teaching others how to make Dub Techno. But I think it’s time to take a chance and open up on all the ideas I compiled about my beloved Dub Techno direction.

This post won’t necessarily explain how to do the typical dub techno. While I’ll cover some of the most asked questions about it, I want to expand on the philosophy and aesthetic itself so you can take the best part of it and merge it into how you work.

Origins of Dub Techno

Before we get into how to make dub techno, it’s very important to me to honor the artists who were behind the genre and to talk about where the genre started. For this, there are some nice videos by Dub Monitor. There are these 2 videos that explain the origins of dub techno better than I could about how the genre started and how it developed.

Dub techno is a subgenre that emerged from the fusion of two influential musical styles: dub and techno. Dub music itself has its origins in Jamaica in the late 1960s, with pioneers like King Tubby and Lee “Scratch” Perry. Dub music is characterized by its heavy use of effects, echo, reverb, and the manipulation of existing tracks, often stripping away vocals to emphasize the rhythm and instrumental elements.

 

The Techno Connection: Techno, on the other hand, had its beginnings in Detroit in the early 1980s, with artists like Juan Atkins, Derrick May, and Kevin Saunderson. Techno is known for its repetitive beats, synthetic sounds, and a futuristic, often industrial, aesthetic.

 

The Emergence of Dub Techno: Dub techno began to take shape in the early 1990s when electronic musicians started experimenting with the fusion of dub’s spacious and echo-laden soundscapes with the rhythmic patterns and synthetic textures of techno, thus making dub techno. The result was a genre that retained the hypnotic beats of techno but incorporated the atmospheric and dub-infused elements.

 

Basic characteristics to consider while making dub techno: Dub techno is characterized by a few key elements:

  • Reverberating Soundscapes: Dub techno producers use extensive reverb and delay effects to create deep and immersive sonic environments. These effects give the music a sense of spaciousness and depth.
  • Minimalism: Similar to techno, dub techno often relies on minimalistic compositions with a focus on repetition. The use of minimal elements allows for a meditative and trance-inducing quality.
  • Subdued Rhythms: While techno can have a pounding and relentless rhythm, dub techno tends to have more subdued and laid-back beats. The rhythm is often more relaxed and groovy.
  • Incorporation of Dub Techniques: Dub techno incorporates dub’s signature techniques like echo, dropouts, and phase shifting to create a sense of movement and exploration within the music.

 

Notable Pioneers: Some of the early pioneers of dub techno include Basic Channel, a German duo consisting of Moritz von Oswald and Mark Ernestus, and their various aliases like Maurizio and Quadrant. These artists were instrumental in shaping the genre and creating its distinctive sound.

 

Global Influence: Dub techno’s influence quickly spread beyond Germany, with artists and labels from around the world embracing the genre. Labels like Chain Reaction and Echocord played a significant role in promoting the making of dub techno, and artists from countries like Sweden, Finland, and Japan contributed to its global appeal.

 

Obsessing on the “How-To” While Making Dub Techno

Over the last 25 years, I’ve come upon multiple and countless discussions online about how the genre is made. People would discuss what piece of equipment was used and be obsessed with recreating the original sound. While this is a state of mind that I totally get – because I also get obsessed about how certain sounds are made – I can’t help myself asking why would you want to redo the exact same results. In a way, it explains why the genre never died in the last decades. There are always people who keep making dub techno.

I think there are a few motivations to join the sound of dub techno. On one side I see it as a self-soothing experience and on the other, by passion, to join others who also make it.

But my take is that people are puzzled about how something that sounds so simple can actually be so mind-boggling to do.

The Main Aspects Of Making Dub Techno

I’d like to cover multiple techniques and strategies to infuse your music with the dub techno approach while also making sure we apply certain tweaks that can make your music have a similar aesthetic.

The first thing to explain is that there are 3 main categories to consider while making dub techno:

  1. Sound Design
  2. Modulation
  3. Colour.

Dub techno has its own touch and sound which will be explored below.

Dub Techno sound design

One of the main characteristics of dub techno comes from the pads and stabs that are fuzzy, melancholic, and enigmatic. In itself, those pads aren’t necessarily that complex to do. I found numerous tutorials on YouTube and have 3 of the ones I prefer. I find they’re well explained and show in similar ways, how to reproduce them.

 



How To Make Dub Techno Chords

As you see in those tutorials, the way the synth is configured, is rather simple  – it’s usually one chord that repeats, but it has specific modulation and color, as I explained earlier. Once you start experimenting with this pad, you’ll already be in business and have the basis for making dub techno.

But honestly, when I found out how to do it, I thought it would make more sense to be inspired by those techniques but to go a bit deeper into the sound design.

In my past dub albums Tones of Void, Intra, and White Raven, I basically used a bunch of synths but kept them very dark in tone (eg. lower notes around 1-3 octaves) with not too many harmonics (eg. filtered). Once you understand that any synths can do that, you won’t be limited to the classic sound of dub techno.

How to make dub techno melodies

When it comes to melody-making, there are multiple approaches. There’s the classic one note (yes, one note) from the old school dub techno (Basic Channel, Chain Reaction) and there is also a more structured approach (Pablo Bolivar, Yagya), almost pop-oriented dub techno. Both work but the harmonic nature of the melodies are often in a minor key, with the root key of D being often a popular choice.

How to make dub techno bass

While making dub techno, bass is often, also very simple, with it being than often than not a one-note thing. Simply using sine oscillators and pushing them forward in the mix will often be the aesthetic of dub.

Dub Techno synth options

As we saw in the 3 videos, dub can easily be created in any context with any soft synth. Over the years, I have tried and tested many of them. While the native plugins of Ableton can do the job, VCV has been my playground but it’s not for everyone even if it’s free and there are so many tutorials out there. Here are some of the soft synths people love.

  • Diva:  So many tracks I hear in mastering use Diva. It has a distinct sound but in a good way. It sounds warm, and lush, and is close to some hardware options. It’s pricy but you get that sound we love.
  • Pigments: Pigments is versatile, open, powerful, and extremely creative. There is a huge playground here with the option of a preset store within the synth itself.  You need to work a bit to get the dub sound but it sounds nice.
  • TAL-U-NO-LX Synth: Juno has been used over the years as a default synth for dub techno, mainly the chords. This synth option works well and is close to the real thing.
  • Go2: Cheap in price but with big results. Even the presets will give you some nice options to start with. I love this one.
  • Blue-III: Rob Papen again and this one is deep. Not for the beginner as you can easily get lost in it but the sounds you get are very impressive.
  • Prophet VS-V: Not many people know but it was said that the Prophet VS was what the early guys of Chain Reaction were using. When there was a VST version of it, we were all drooling. While it is very powerful and nice, it is not the easiest to program. But the sound is very impressive.
  • Prophet 5: This is a synth we all used for years in the early 2000s when we wanted the dub sound. It aged so well and it’s fun to use. You get tons of options for synths, pads, and stabs. Recommended and often on sale.
  • Orange Vocoder: This is not a synth per se, as it is of course, a vocoder but this was used by so many people as you can basically throw any sound in it and this plugin will turn it into a lush synth sound. Really powerful and a nice alternative to just synths.

 

Dub is a vibe and an aesthetic, not a bible. You take the aesthetic and apply it to any sound.

Once you pick your aesthetic, you can apply the concept to any synths you have.

What you need is to create and amplify your harmonics with saturation (tube and tape do great), then have a colored filter and sent to delay and reverb for cosmetics. This means that if you have any synth of yours, you can make it dirty with a saturation and then filter it. The reverb will then do the trick.

What will make a difference is to juggle with the most genres of saturation: distortion, amp and saturation itself. Using a combination of the 3 will bring really lovely colours but be careful not to overcook your sounds. Keep in mind that in mastering, it will be boosted so what sounds like a pleasant distortion can become overwhelming later on.

Some of my saturation go-tos are below.

Saturation plugins used in making dub techno

  • Surge XT: (FREE!) This is a collective of developers who managed to create a badass synth and free, high-quality, effects. Their Chow Tape is quite amazing but also all other distortion/saturation tools. A must-have and hey, it’s free.
  • RC-20: This one came in popular in the lofi hip-hop community as a de facto plugin to have. It adds lofi vibes but this is an element dub techno also has so the cross use is totally on point.
  • Reamp: The guys behind this are very solid and this one has a beautiful series of plugins which are all very solid. I like the colour this one has.
  • Saturn 2: Anything Fabfilter is a leader in its domain. Saturn is not an exception, as it is very good at what it does, which is to make anything too pretty, a bit uglier, dirtier.
  • PSP Saturator: PSP is one of my favorite company for their plugins. I love their EQs and compressor and this saturator does a great job on pads.
  • Satin: This is such a handy tool here. It is tape saturation/simulation, but also a tape delay which can create weird reverbs and wobbly signals. Once you start using it, you’ll be using it all the time.

Reverb plugins for dub techno

While Ableton’s reverbs option can do the job, I always rely on third-party VST for that part. It’s hard not to mention Valhalla plugins for this. The Supermassive is free and the Digital Reverb is sort of a perfect match for dub. If you have to pick, I would recommend experimenting with “plate” models and some use of a “hall” as well for sustained notes.

Whatever you do, to me, Dub Techno really starts with a heavy use of reverb, which has to be modulated, filtered, and distorted. Understanding how to use your reverb and combining it with a delay will ensure that you have a proper dub mood. If you pick the reverb properly, you almost could say that you have 50% of your job done. The rest are the sum of a lot of details but when you have your reverb done right, you’ll automatically feel you’re making dub.

Anyone who knows me has heard my affectionate passion for reverbs. I compiled some of my favorites for Dub Techno.

 

The saturation tools native to Ableton aren’t too bad but can be recognizable easily by an educated ear.

  • Lexicon 224: I’m a big fan of Lexicon. It has a character and tone that I love. Not sure what it is, but the grain and how it feels just does it for me.
  • Springs: Spring reverb is a type that makes sounds sent through it, sound liquid. This works well with percussive sounds and you’ll feel like some classic dub vibes.
  • Fabfilter Pro-R: This one is amazing for spaces. It is a powerful tool to shape grandiose halls and give tremendous space.
  • Adaptiverb: There’s different tools on that ones that makes it unique. It has a big array of presets that are tuned to a root key, which can create pads out of unusual sounds. Quite unique.
  • SP2016: I call this one a Cadillac of reverbs. It’s elegant, warm, very ear pleasant and very visual. I feel immersed when using it.
  • bx_rooms: Extremely versatile but the interface can be intimidating. It has lovely options for different room types.
  • Blackhole: This one is spooky, deep, powerful. It is a reverb that makes you go in space as it sounds pretty sci-fi, rich, and gigantic sometimes.

 

Now reverbs for dub are essential but you’ll need delays as well. You can either use long delays or short. There’s no right or wrong but the use of delays helps you take very simple sounds and create repetition, which transforms the straight-forward pattern into psychedelic equations. Delays, combined with reverb, create a thick background and will make any sound – which feel empty at first – fill with a velvety, dreamy carpet. I think for a lot of fans of the genre, it’s a quality they’re after.

Echo and Hybrid Reverb in Ableton. They can do a long run if you don’t want to break your piggy bank.

Additional plugins for making dub techno (delays, pitch modulators, etc).

  • Diffuse: These guys are dub lovers and this tool here is a go-to for reverb/delay as it’s an emulation of the famous Roland Space Echo which was in so many studios.
  • Modnetic: Same guys as above. This one is a combination of all your need in one place to turn a single, boring sound, into a dub tune.
  • Echorec: The guys at Pulsar are very competent at recreating hardware toys and they created a tape delay with self-oscilating, magnetic fields and all you wish for in a dirty delay.
  • Galaxy Tape Echo: This is UAD’s recreation of the Roland Space Echo and it is really well done.
  • Tal Dub-X: As the name implies, this is a station with all the options to turn a simple delay into a modulated one.
  • Echo Cat: Another beautiful emulation of a tape delay. But a really solid one.
  • PSP 42: Popularized by Richie Hawtin in the early 2000s, where he’d loop-delay sounds and pitch them up/down, the PSP42 was used abusively in all his sets for years. Rich was basically doing dub techniques in his own way.

 

Modulation in dub techno

If you just take any synth sounds and send it to your effect chains, you have done the first step but it won’t be complete until you make it move, react, and evolve into modulations. There is a lot to take in in this section because this is also one of the most discussed topics in my blog – I have covered it inside out already but you now know why, because Dub Techno is all about modulations. Once you dip your toe in those waters, you’ll become excited about it and apply it everywhere.

If you watched those tutorials on how they make the dub pads and chords, you’ll see that they use modulation on the filter. There is both use of an envelope and LFO to modulate the frequency of the filter but also its resonance. That’s just the tip of the iceberg to me. If there is a parameter on a plugin, I like to think that it shouldn’t remain static and have it move, even a little bit.

But of course, a lot of this can be handled by my favorite “Swiss army knife”, Shaperbox which is designed for modulation on all levels. A must-have.

When to use envelopes and LFOs when making dub techno

Well, if it’s a modulation that is reacting to an incoming signal such as when a sound comes in, I want the filter to react, then you’ll use an envelope. That kind of modulation is excellent for accentuating or attenuating sounds, creating a more organic feel to the processed sound.

If you want constant movement, LFOs are excellent for that. They just move to the tempo or not. They give the illusion that things are constantly on the go and help blur the lines of linear arrangements.

There’s one precious bundle that I love from Make Noiss that has so many little tools, perfect for modulation and midi signal processing. Not to forget my friends at Manifest Audio and their large array of max patches as well that are perfect for modulation but they also curated many racks for dub.

The 3 Amigos are here to turn a static idea into an animated figure.

Colours of Dub Techno

I know you might be confused by colour here as we discussed of saturation as a form of colour but this is the last touch. The colours here are from different sources else than saturation and also, very complementary. What I’m referring to are the effects of the chorus, phaser, flanger, tremolo, vibrato, auto-pan, harmonizer, wobbler, and also, one of the most important parts which is the hiss. Apart from that last one, all those effects are often heavily used in dub and it’s quite a nice touch to pick one or 2 on your sounds.

These guys are a lot of fun and sound pretty lovely.

Chorus, phaser, and vibrato

Chorus, phaser, and vibrato work really well with synths, pads, stabs, and chords. They give this engaging, trippy, stereo effect that quite often, makes a dull sound jump out of the mix. Keep an eye to make sure you don’t get phasing issues which would be an overuse of one of those effects. Phasing is quite common in dub and I often fix those issues in mastering. It’s better to control it when decorating your mix.

Flanger

Flanger gives this jet-sound feel to anything. It brings pfshhh sound to metallic or noisy sounds and can be quite psychedelic if used at a low level. I like it on hats and delays.

Tremolo

Tremolos are sort of a secret sauce that everyone underuses. It’s basically a slow or fast modulation of the amplitude of a sound. It is a superb tool for creating 3D feel where you feel sounds go away from you and come back. It turns anything linear into a lively, feeling motion. At a faster speed, it can even be used as a swing/velocity for percussion. Combine it with an auto-pan and you have head spinning spaced out moments.

The hiss part is quite important as well. The noise floor is something deep in the DNA of dub. There are multiple noise makers. You can dig the internet for noise sources, recordings or noise-making tools (RC-20). Satin has a nice hiss that you can use as well.

Conclusion

Making dub techno should be a playground of experimentation. It’s a genre that I approach with a very open mind and so do many other fans as well. While often people feel like they’re just repeating the clichés and perhaps nothing new comes out of it, then I’d say, dig deeper. There are some gems from people who push the boundaries of the genre.

Lessons I Learnt From Hosting A Music Producer’s Retreat

/in , /by

I don’t know about you but when you’re passionate about music, it’s both a blessing and a curse. In one way, it occupies a lot of space mentally and can become a bit obsessive, while it also creates this need to connect with others about it (so you know you’re not crazy). If I look at how things are at the moment, to connect and meet other musicians in the real world, we face limitations on where you can come across them. Perhaps you can meet them in a café, or a record store, but it’s not a sure thing. Realistically speaking, you’ll depend on clubs and festivals to have most music-oriented discussions.

But let’s be real here, the options are limited. Raves and clubs are fun but they’re also recess time where having a chat might be distorted by the loud music, noisy atmosphere, and perhaps distorted by mind-altering substances.

There was a time where I had the chance to have access to a rich community in Montreal, way before social media, where we would hang out after events (not after-parties) to make a meal and talk. We would do studio sessions, collaborate, and share tips. Nowadays, it’s still possible and while social media can give you access to anyone, it won’t assure you that you’ll be able to connect properly afterwards.

The idea of making retreats came to a friend named Fred and I, years ago, where we wanted to leave the city with friends and do a weekend of intense music immersion. We did 2 events and they were successful. We had to stop because of the pandemic but since I moved to the countryside, it became clear to me that I had to continue doing them, but in my home. The idea was to give access to my house, have people stay for a weekend, give workshops, share, discover friends’ music, and see where that leads us to.

I learned a lot in the last two retreats I did and I’d like to share some insights but also, some tips if you want to organize one with your friends.

 

Lesson I learnt #1: Being in the same place as other musicians for a moment opens up music options and leads you to be curious.

Why make a music producer’s retreat?

 

There are multiple reasons why one would want to make one. The first is to escape your routine and immerse yourself in a connection with your music, allowing you to start projects and/or finish them. I would say that people who come to the retreat will mostly be motivated to be in a space where others work on music. It’s not alien to say that if you’re surrounded by other people making music, it gives you an inner boost to do the same.

Collaborating and discovering music are also other reasons to throw a retreat.

But whatever you choose to do, I remind participants that there is no right or wrong way to do it. There’s also the option to not do much else than just being around people. However, if you use your time, it will have an impact later on.

 

Lesson I learnt #2: The reason why I do retreats is to connect with people who have the same intentions as I do, which is sharing passion.

 

The Loneliness of the Musician

It’s not new, but being alone in the studio is often a hard situation. There’s something frustrating about discovering new ideas but having no one around to hear it or validate it. Modern electronic musicians often go towards that genre because they can be a one-man band as you can get to results quickly but this means that success, or failures, will also be lived alone. Having fellow friends and a community is important to go far in the long run as your network will introduce you to new ideas and opportunities, and spending time in a place over a weekend, sharing fun moments, food, and discussions is a great way to build a community.

Lesson I learnt #3: My writer’s block and tendency to fall into a rabbit hole go away during a retreat.

 

Technical validation and diversity

Being around other musicians brings the opportunity to see how they work, what tools they use, and which plugins solve certain issues. It’s also a moment where gear can be shared, and you can see how each person handles it, giving it a new perspective.

Ironically, in the last years, I’ve always seen some producers being very secretive to how they work and the gear they use. I find that silly.

No one is the beholder of new techniques and there is nothing done that isn’t already known. Pretty much anything and everything is covered online, either in a blog, forum, or simply on YouTube. Holding on to how you work, in my opinion, reveals a good dose of anxiety and insecurity. There is this explanation that keeping secrets to keep your mysterious image is a thing, to which I say that it just takes a few audio engineers to reverse the knowledge. The only thing that no one can take away from you is your soul, your identity. Tools and techniques are simply there for that part of yourself to express itself. The more you open up to others, share what you know, and create dialogs, you’ll be rewarded by meeting like-minded people who will consolidate what you know with ideas you didn’t think about… because you were self-centered.

That said, people around me during a retreat are always a bit surprised and happy to find out that I have no secrets, and the only thing I want is to see others succeed. The teaching mindset goes beyond immediate success; I want to plant seeds in people’s minds to see what will emerge later. There have been so many times when people that I have coached have come back to me later on with ideas that inspired me while I struggled with writer’s block.

Lesson I learnt #4: Explaining concepts to others help me understand what I do.

The Impact on Creativity

 

One thing I noticed with people attending is how a sense of flow emerges by the last day. Flow is a mental state where people get into a zone where they create freely and where everything falls in place; where technical limitations seem to disappear and of course, lots of fun happens.

This flow state seems like the ideal way to create. While a continuous flow state may be too good to be true, if we can reach that state once in a while, it is, to me, one of the real goals of the retreat. Because once you experience that state and how you got there, you know you can bring back with you, this way of being as a musician.

Offering workshops is then a gentle push to unlock frustrations. I make sure these workshops are aligned with the technical level of the participants where I can offer tips on what they struggle with.

While we often search for big impacts to feel we have changed as an artist, I notice that the sum of many little tweaks provides more long-lasting results.

Lesson I learnt 5: Ironically, most of us make music to connect with others while we don’t organize enough community related events. Once reunited, goals of finishing songs or other related validation tasks become more than secondary.

Where to organize a music producer’s retreat

Any location could technically work to host a music producer’s retreat, but I would stress the importance of it being at least 1 hour away from home and ideally, in the countryside. There are many benefits from being able to take a break, go outside for a walk, and step back from anything that is too human-influenced (roads, concrete, asphalt, buildings, etc). In my case, I’m in the countryside with lots of land where we can easily walk for an hour before you get to see most of it. It’s like a big park, more or less, but wild and open. Sure, you can record sounds, but one of the important parts is to be able to breathe fresh air.

One option is to rent a cabin with friends. I would encourage you to have people who are in the same mindset as you. You can then have a space for music making and another for eating, and relaxing.

Space is important and having a place where you feel comfortable and inspired is crucial for the ambience.

Lesson I learnt 6: The ideal place is one you know. If you can find a place you’ve been and love, it will be successful.

Intention and commitment while at a music producer’s retreat

It’s easy to get this part wrong but it is probably the most important. One thing we clarify with this retreat is that it’s not a space and time to party. This is something accessible in other ways and the retreat is a commitment to get things done. Therefore, we have this no alcohol policy as well as a curfew at a certain time. Not only did I have no resistance from attendees, but everyone was extremely happy we did this once the weekend was over.

At the opening of the weekend, we had a meal where we all discussed our needs, our goals, and things we would like to do. As everyone talked, I noticed that there was some shyness at first but as we had multiple talks over the meals, by the end of the weekend, people were more and more open to sharing insights, struggles, or exciting finds. We all have the same difficulties in the end, which is why if one opens up, others will relate and follow suit.

Lesson I learnt 7: Having a moderator, leader or experienced musician is the best way to face difficulty while also making sure you can hold space for intentions to remain real.

Unexpected wins

To finish this post, I have learned that working on a song over the weekend isn’t the most ideal approach, I believe. I think there is much more to gain by trying to organize all your songs, macros, and presets and update all of those sleeping tunes in your backup drive. Being curious, trying new techniques, and facing some parts of music-making that are challenging are some of the best things to be in a context where you are supported.

Topics that were very useful and that participants enjoyed:

  • Techniques to start new songs and create unlimited hooks.
  • Sound design and reverse engineering ideas.
  • How to organize an idea into effective arrangements.
  • Mixing a song in 20 minutes.

Lesson I learnt 8: Always accept that there is something you might know enough or properly. Remaining open is a way to always grow.

 

Testimonials from Participants: Let’s hear directly from those who’ve attended:

  • Marino: “I had an unforgettable weekend at Pheek’s retreat. It was more than just music; I learned a lot of things, met wonderful people from different backgrounds, all of whom share the same passion as me – music. Pheek welcomed us with love and kindness in an amazing landscape, always there to help when we faced creative roadblocks. I recommend it to anyone wishing to develop their skills while leaving their comfort zone.”
  • North Motion: “My experience was simply fantastic. I had the opportunity to meet many artists who, like me, are passionate about electronic music. Beyond the skills I learned, I formed great friendships. Pheek’s retreat offers exceptional facilities in a breathtaking location, and J-P’s knowledge and hospitality are unmatched. I give it a perfect 10/10.”

Turning Efficiency Into Art With Ableton Templates

/in , /by

DOWNLOAD MY ABLETON TEMPLATES:

Production template here

Mixing template here.

Every musician, regardless of their experience level, has felt the excitement of sudden inspiration. It’s an ethereal sensation, demanding immediate translation into audible reality. Yet, how often do we find ourselves navigating from scratch through our Digital Audio Workstation (DAW), struggling to set up the basics when all we want to do is create?

Here, the power of templates in DAWs like Ableton Live becomes apparent.

If you haven’t started using templates, I would like to encourage you to do adopt them into your routine. At first, this might be difficult to master, but with some practice, this routine will pay off.

 

So, what’s a template (if you aren’t familiar)?

It is a project with or without material, that can be used as a starting point. Instead of starting with a new project, which would be 0% in a scale of work out of 100%, a template would be more like 10% or even 40% towards the completed piece of music. This may be confusing because 40% done usually means having a lot of material in a project. However, when everything is organized properly, you are way farther ahead than you imagine.

Creating an Ableton template

To create a template, all you have to do is open a project, go to the File Menu, and select “Save As Template.”

This will allow you to have your finished project as a starting point to start new projects, vastly speeding up the process and giving you a consistent sound.

Two ways to organize an Ableton template:

Two ways I usually organize a template is to either create a project where I organize in advance everything I need like channels with plugins and settings already set to what I usually do, macros, return channels, and master bus ready. Once this is all prepared, I save it as a template.

The other way is to take a successful project, remove all clips, audio, and automation, and then save it as a template.

However, this isn’t an exact science. It’s also fun to save projects with automations and or other weird settings and save it as a template, as inspired by Matthew Herbert Manifesto.

Starting Fresh vs. Jump-Starting with Ableton Templates

 

There are pros and cons when staring fresh vs jump starting a project with template.

Many musicians will start fresh every time, perhaps because they don’t know about the idea of using templates or perhaps because they just know that way. Starting fresh offers valuable practice, fostering familiarity with their DAW tools, and enabling a tailored approach to every project. However, there’s a flip side: it’s time-consuming.

Imagine being a painter and having to craft your brush every time you felt the urge to paint. While understanding your tools is essential, it’s equally crucial to be ready when inspiration strikes.

The solution? Find a balance.

By all means, start fresh when the situation permits. But also arm yourself with templates to expedite the process when needed.

Template Idea: Create a project where you add multiple midi channels with each armed with your favourite synths. For each synth, hit cmd+G to turn it into a macro (Group) and map your favourite synth parameters to each knobs. This will ease hands-on control or hit randomize for some new inspiration.

TIP: I would encourage you to grab this selection of free modulators named Mod Squad 2. This has so many useful, essential tools to add to your template.

 

Ableton Templates: More Than Just a Shortcut

 

At first glance, a template might seem like just a preset, a way to save time. But there’s no problem with presets and trust me, it is not cheating!

While templates are certainly is a time-saver, it’s actually much more. Think of a template as a supporting musician friend, always ready to jam when you are. With templates, you can:

  • Create Macros: Setting up macros that you frequently use ensures you have immediate access to your preferred settings and controls.
  • Organize Routing: Advanced routing configurations, once set, can be easily replicated across projects.
  • Form Groups: Grouping tracks or instruments that often go together saves time and offers a clearer view of your project.
  • Pre-set Effects and Plugins: Having your go-to effects and plugins already loaded lets you dive straight into tweaking sounds.

Ableton Template Idea: Create your own mixing template by creating 5 groups that will host your project’s channels. You can then drag and drop them in each groups. Those can have multiple plugins of your choice. You can even create a mixing template with multiple channel presets and then you can drag and drop them from your browser.

The Art of Crafting Abelton Templates

It’s not just about having templates but about having effective templates. An ideal template should inspire creativity, not box it. Here’s how:

  • Diverse Templates for Diverse Needs: Instead of a one-size-fits-all approach, consider multiple templates for various purposes: mixing, sound design, production, and perhaps a comprehensive one, like my “mothership” concept.
  • Incorporate Modulation Elements: Add pre-configured modulation tools that respond and interact with what you introduce. Tools like envelope followers or audio scrubbers, such as the ones Manifest Audio offers, can automatically detect and modulate sounds, adding depth and dynamics to your music.
  • Think Support, Not Supplant: A template should never feel like it’s directing your music. Instead, it should feel like a base on which you can build. The best templates enhance creativity, not limit it.

When Ableton Templates Truly Shine

The true test of a template’s efficacy is in its ability to enhance creativity. If using a template feels like you’ve brought an extra pair of hands into your studio, aiding and elevating your music, then you’ve hit the sweet spot. It’s not about replacing the organic process of music creation but about having tools that streamline it.

In the world of digital music production, where the landscape is vast and the tools are many, templates emerge as a beacon of efficiency. They are not just about speeding up the process but about enhancing the very essence of creativity. They ensure that when inspiration strikes, you’re not just ready but equipped to let your ideas soar. Embrace the power of templates, and watch as your music production process transforms from mere creation to pure artistry.

 

DOWNLOAD MY ABLETON TEMPLATES:

Production template here

Mixing template here.

Crafting Club-Ready Tracks

/in /by

It’s no secret that I’m an engineer for mostly electronic musicians but whoever comes to me for mastering, one of my main task is to make sure their music sound solid in club/festival context. In the last years, it’s been impressive how bedroom producers, not just pros, will have their music played in a context where the music is loud. This is due to the rising number of people who turns themselves into DJs and then this opens door to play in a local pub, party or club.

But it’s the same for producers. There’s been more and more people making music and for a lot of them, their hopes is to be played by DJs, not just in a podcast, but in moment where it can be heard by more than a handful of people. That becomes a test of the quality of their production and mixing.

But it can also be falling flat if the track isn’t following some basic standards.

I’ve been asked to go through a checklist of points that can help anyone to avoid feeling frustrated with their music.

 

1. Tone: The Foundation of Sound

When preparing music for clubs, tone is paramount. Many producers overemphasize certain frequencies because it sounds good at home, leading to mixes that are either too shrill or too muddy. Having the wrong music references, not understanding that all clubs are different can lead artists to pick some bad decisions.

Aim for a more balanced, flatter tone.

While there’s room for experimentation, avoid excessive highs, which can sound harsh, and overly pronounced lows, which can leave your track sounding hollow or muddy. A balanced tone ensures your track will work across various sound systems and club environments. This would apply to home listening as well.

TIP: I love to put an EQ on the master bus to see the tone of my track. If it tends to have one section higher than the rest, that is not always a good sign. If there are some peaks over 10k, this can be pretty harsh on a big sound system. If your low end is louder than your mids, by more than 4dB, you can expect your song to lack presence in a club. The melodies will sound behind.

 

2. Loudness and Density: Power Without Overpowering

 

Loudness is undeniably crucial in a club setting, but it’s a balance as well as a double-edge sword. While ensuring your track has punch, remember DJs need some wiggle room for gain staging during transitions. The goal isn’t just about raw volume, but rather the density within specific frequency areas, especially the low end. While a track that’s slightly quieter isn’t an issue, it should have the right energy and weight in crucial frequency areas.

DJs should know how to do gain staging. When they complain the track isn’t loud enough because they had to turn the gain up, I’d suspect that they might know that this is absolutely normal to have differences. Tracks that aren’t as loud will have more dynamic range, giving the track more details, punch and ultimately, life.

To reach a certain loudness level, the mix will need gain staging done right and then, in mastering, compress and limit more. Loud music means sounds bleed into one another.

TIP: After years and years of mastering, playing and attending, I find that -10LUFS is sort of the ultimate sweet spot. Some will argue that music should be louder but I believe not.

 

3. Mono Signal: The Unsung Hero in Club Tracks

 

While stereo spread adds richness and dimension to tracks on headphones or home systems, the mono signal is a powerhouse in a club setting. Songs that rely too heavily on stereo spread without considering their mono compatibility often lose potency on club systems. Prioritize the main elements in your mix to be mono-compatible, ensuring they drive the track without muddying the sound.

Sounds that should have some presence in the mono signal: Kick, Bass, clap/snare and melodic content between 200 and 800hz.

TIP: Create a return channel, add a utility plugin set to mono and then send your different sounds towards that channel. This will solidify your mono signal as you’re either doubling or enhancing your sounds’ presence.

 

4. Resonances: Subtle Saboteurs

 

High resonances can wreak havoc when played on large sound systems, turning subtle tones into screeching sounds. I often say that as a mastering engineer, I hunt those. Resonances can come from various sources such as resonance on a filter or the use of sine waves. I won’t get into details about what they are exactly but they’re sort of the type of sound, just like distortion, that sort of sound amazing at the right dose.

It’s vital to control and tame these, ensuring that your track remains pleasant and consistent across various volume levels and systems.

I’d add in parallel to this, as a 4-B, transients. Those are also to be careful with.

TIP: Using an EQ, you might want to tame the resonances but if you can’t spot them because this concept is not easy for you, don’t hesitate to start by putting in solo each sound and find the ones that have a “eeee” sound in it (it can be pitched high or low). We often find resonances into synths, because they often have either a sine wave oscillator or a filter with resonance.

 

5. Clarity: Space is the Place

 

Every sound in your mix should have its designated space, both in the stereo field and in the frequency spectrum. Overcrowding with prolonged decays or excessive reverb leads to a soupy, unclear mix. By ensuring that each element has room to breathe, your track will retain punch, definition, and that coveted dance floor energy.

TIP: Gating is your best ally in mixing. You can remove tails and reduce the decay of sounds with it which helps much.

 

6. Phasing: The Silent Song-Wrecker

 

Phasing issues can lead to essential elements of your track disappearing, especially during mono playback. This phenomenon is exacerbated by phase-inducing effects like flangers, phasers, chorus, delays, and reverbs. By understanding and addressing phasing, you ensure that your song’s core elements remain consistent across all playback scenarios.

 

A good way to find out if one sound is phasing in your project is by using a Correlation Meter such as SPAN (it’s free!). You’ll see this moving meter and basically, you want it to stay from 0 to +1. If it goes into negative, you’ll have phasing. Another way is to put a mono utility on your sound to see if it loses a lot of power or disappear completely.

TIP: How to fix is a bit tricky but you can start by lowering the stereo width, remove effects or make them drier.

7. Low-End Clarity: Making Your Bass Dance

 

The relationship between your kick and bass is akin to a dance. These elements should groove seamlessly, complementing rather than conflicting with each other. Using techniques like gating or side-chaining can ensure that these foundational elements coexist harmoniously, driving the rhythm without muddying the mix.

In the recent years, I have been enjoying shorter kicks beyond long powerful ones. There’s too many issues with using long kicks and in a club, they eat up too much space to be interesting enough. Short kicks support well a song and leaves you plenty of space for lower notes of a bass.

Rumbles, depending of the genre you’re making, might be a problem. You might have a DC Offset as well so I would highly recommend cutting (highpassing) at 20hz to block the garbage down there. Most clubs but at 30hz anyway but cutting at 20 is a good safeguard and will also provide some headroom for your mix.

Align the phase of your kick and bass! Simple trick that does a good little difference in some cases.

TIP: For people that heavily rely on side-chaining for making both work, I always say that arrangements are the root of mixing. In other words, if you program/design your kick and bass properly at the beginning, then it will be cleaner and you won’t have to fix it with gizmos.

Club environments pose unique challenges for electronic music producers. By taking into account these seven pivotal factors, you can ensure your tracks not only sound great in the studio but also shine on the dance floor. Remember, a club-ready track is a synergy of balance, clarity, and energy. Aim for these, and you’ll have club-goers moving to your beat in no time.